
Some recent work on the track; scale 'bluestone' blocks (grooved charcoal concrete pavers) for retaining wall onto the truss span, point motor wired up, southern curve levelled and roadbase widened.
A blog about the development of the Southern Riverina (Garden) Railway at Mulwala NSW Australia
The Council has decided, quite reasonably, to bring sewer surge, access pits to the surface for... access! Sadly we have one in our yard - under the track. I knew it was there, but my recollection was out by about 60cm. (Council data was out by a metre) Decided to expose it myself rather than have them mess about. Had to cut the track as the removable section was out by, yes, 60cm. Apparently steel rings and a new steel sealed hatch is the plan. 210mm total rise makes the hatch level with the bottom of the steel ties. So that is the maximum it can tolerate.. Top left is the new hole about 30% bigger than the hatch.
Added 3A PPTC fuses (or Polyswitch) to the Li'l Big Hauler. These haver low resistance until a specified current is reached. The 'poly' film then rapidly heats and its resistance vastly increases. When current is removed the film cools, circuit restored... So they are really an auto resetting circuit breaker!

Found a cheap Bachmann G gauge Li'l Big Hauler, and thought I could RC it with bits I have... So here it is with forward reverse with the RCS handset - and a directional headlight... Runs on 45mm track, and guess what... with 12mm rail head the distance between the 7 1/4 an 5 inch rails is 45mm!! Cute eh?
I will need longer axles for the adjustable pillow blocks. The bearing centres are quite long. So I have put 75mm wheels on the standard sized axles with a simple suspension of 15mm pillow blocks, coil die springs and 1/4" bolts. This is for a small driving car... a 1 1/2 seater. It will have a simple rectangular frame of mild steel angle or RHS. We will see how we go...
First pair of coupler pockets for the ride-on cars. 40x40mm outside 32x32mm inside. 1/4" pins, per AALS 5"gauge standards. The mounting holes are 70mm between centres for 1/4" HT bolts through the buffer beam. Height above rail top 3 1/4" or 82.5mm to the centre of the pocket... Like this...