Tuesday, 1 September 2015

Joins in the 'Curve Jig'

 Made a second curve and used the jig to weld the two, 3 metre lengths together. So now have about a quarter circle in one piece. The join is smooth and even!!

Next time though I will put the jig on the ground, or at least out on the grass. Hard work getting the big piece out of the jig and around the veranda posts...

The weld still needs a little work now its out of the jig. Really could do with a gas MIG welder...

Oh and I have 8 600mm lengths of 'rail' with Pete at McBurnie's to be machined for 275mm into blades for the points...

Friday, 28 August 2015

First 'point in the jig!


Another bit of play time today. The first sets of points / switches / turnouts are in the jig. I am first working on the 'right hand turnout'. 

Here it is carefully 'gauged' with a few ties weld on at the ends. My first 'point' is a bit rough - underneath, (which is what you see in the jig) but welders and grinders will fix that. 

When done I plan to harden the point with heat and quenching... 

Next I need some bar machined into blades...

Thursday, 27 August 2015

First Curved Rail from the new JIG!

Well, having made a jig for curves, I had to try it out! So another 'play' day for me.

Here is the first 4m outside radius curve.
Upside down in the jig and right way up...

It takes 8 for a circle!

And Laurie, I did bash the ends into some sort of curve...(The rollers miss about 100mm on the ends).

As I have made the curve jig with scope for only 0.5-1mm gauge widening, more than two axle wheel sets will struggle with the tightest radius. So I limit myself to dual axle bogies and loco to 4-4-4 wheel sets - and assuming side movement on the bogies too...

Wednesday, 26 August 2015

Curves and more jig...

With Laurie and Trever from our club, Moira Miniature Rail, last Sunday

afternoon we curved a pile of 20 x 10mm mild steel bar as rail for the SR(G)R, along with some 20 x 20mm RHS for the curve and points jig.

Interesting learning experience as the resilience of the bar varied quite a bit. Each couple of metres took the bending differently. I expected that once we set the roller correctly it would just be a matter of feeding in the lengths... Wrong. Each piece needed adjustment or re-rolling, or un-rolling. An hour or so's work took four...

The RHS was another matter. We did the short outer curve first - went well. The inner curve was the fed. Being a shorter radius, it should have required a second pass. Disaster it curved way too much. We worked out that the welded seam was on the inside, whereas with the first piece it was on the side.

As the tube is rolled then welded it is apparent that the rolling work hardens the steel and welding the seam anneals that side. So the welded side is 'softer' and bends more easily. didn't think that through first... So an hour was spent trying to reduce the curve. Live and learn.

This morning I have tacked up the curved bit of the combo straight-curve-points jig. This is upside down in the first two pix... Right side up in the third... to assemble the track and outside rails of the points upside down - in order to weld the sleeper ties on from under the rail. Neater?

Most of the ties under points will be continuous across all rails. Just placed some pre-cut and drilled straight ties here to play with spacing. Then I will fire up the band saw...

Tuesday, 25 August 2015

Points motors...

Decided to electrically switch points using a 50mm throw linear actuator through a sprung bellcrank!

Have ordered some bits: a four channel RF remote, some 12vDC DPDT relays and one actuator to try.
I have a small DIN distribution board to house the relays and rx...



Saturday, 28 February 2015

Track Jig

 First 3 metre length of straight track in the jig was made yesterday!!

Welded under the rails - with new rods!!! My old ones got wet ... again. Also used newly cut gauge gauges at 127.1mm, and every metal clamp I own.

All the sleeper/tie spacing (150mm) was carefully measured so I will flip the track back into the jig and weld on some locating guide plates for easy positioning of ties on the next length.

The jig will soon be a 4 way device: straight, 4m curve, left point, right point!!


Tuesday, 17 February 2015

Change of Project... Y Class

While nothing much is happening with the SRR, I have still been researching and thinking... Yes dangerous, I know. As a consequence I have changed aim and plans a little. As discussed the old VR Tait trains stick so much in my memory; I really want to build one... but as a 'Fast Parcels'. But first I need to build a 'diesel' (well really battery) electric.


While the F Class is a favourite, closely followed by T Class, I have just discovered/realised that the Y Class used recycled power bogies from the swing door Tait power units. So, if I design and build scale bogies I can use them on both!! The shorter distance between bogie pivots (compared with Y Class) will help me on (my) tight curves. So 4 m radius is a design spec.

Also considering scale: the majority of 5" gauge scale rolling stock is 1" to 1' ; 1/12 ; 1:12 so that will be the scale! Which also helps with the tight curve; compared to 1/10th...

Now a 4m radius is a circle of circumference of 25.1m. In 1/12 scale the bogie pivots centre is 0.516m or 0.02055 of the circle. So 360x.02055 means the bogie only need pivot less than 8 degrees between themor 4 each - tangential to the curve. With axle centres of 0.216m - on the curve the axles will be displaced a maximum of about 15mm each way. And so the design specs solidify...

Thursday, 15 January 2015

Scale!

Did I mention how annoying (and pointless) I find the "something to the foot" scales?
I can't figure how anyone thought 16mm to 1 foot was sensible.

Well if a 5" model gauge track represents a real 'broad gauge' track of 5'3" (Victorian/Irish) or 4'8.5" (Standard/ Two Roman mules whithers wide); that either 63"/5" = 12.6:1 or 56.5"/5" = 11.3:1 would be the appropriate scales...

The average of both options is 11.95:1 OR damn near 12:1 OR ONE INCH TO THE FOOT!
If I pursue Vic Rail prototypes, then I have just about talked myself into it!!!

On the other hand, my new  friend Duncan is pursuing narrow gauge prototype so 3'6" gauge equates to 42"/5"= 8.4:1 whereas 3' gauge equates to 36"/5" = 7.2:1. He is settling on 8:1 = 1/8th scale.

My starting point of 10:1 = 1/10th scale is very close to  1 205/1024 inches to 1 foot !!!! (1:9.999!!!) Maybe the world needs a new standard!!!

Wednesday, 14 January 2015

Sleepers

Having now helped level an existing track (at Kidstown)- lifting track and packing ballast, I figure bigger sleepers will be an improvement. So timber attached by screws to the welded steel 'ties' is the plan - as is common practice.

We have recycled the old balcony deck and have over 400 pieces of Jarrah about 90X20mm and generally a bit over 300 long. Cut to length and with the tongue and groove trimmed off they should be good for another 50 years...

First 4.5 metres done, and at 7 per metre we can do over 55 metres of track, excellent.

Monday, 22 December 2014

New Train Driver

Maz has been anointed... driving paying passengers at Kidstown yesterday.

Monday, 8 December 2014

Change of Spec...

Whilst having time off - building a new kitchen - I have decided that my minimum radius should be 4.0 metres. Some 1:12 and even 1:10 scale multi axle or bogied/trucked locomotives can actually make it around a 4.0 m radius curve - so they say. I cannot go much larger... My VR T Class will be designed accordingly...

Thursday, 23 October 2014

Trainee Train Driver

Maz and I have joined Moira Miniature Rail Inc! Real nice bunch, motivated to build their own track at Wunghnu (pronounced one ewe...). They have been raising funds and building track since '09.

We can learn, be legal to operate on other organisation's track, and ... have fun entertaining kids of all sizes. Membership covers liability insurance, and of course requires Working With Children checks.


Numurkah Show the other day was our baptism of... fund raising.  You can spot Maz behind in the marquee - counting heads... or bums - on seats! See Moira Miniature Rail on Facebook for more...

Sunday, 5 October 2014

Truss...


I recycled the zig zag wrought iron balustrade from the house into a pair of trusses and made a span of 2.5 m - which will sit level next to the fence and over the slope down to the old willow tree.
The weed mat will go to the fence and under ballast. Sick of weeding around the trees. The potted jade plants will go into the ground.

Track Layout - Lakeside...

Walked around with a tape measure and can of marking paint this morning. Here is a sort of oval with 3.5m radius curves. So that's about 40m of track plus straight all along and parallel to the fence. Two sets of points and a y point... It stays above the slope down to the lake - except for the reversing stub on the truss. Track will continue along the far side of the house...

This is a panorama from the iPhone so is a bit distorted...

Tuesday, 1 July 2014

Curtis Controller

 Procured a Curtis 24v permanent magnet motor controller $50 from ebay. Would love to be able to program it... Provides all sorts of functionality including regenerative braking.

Something more to play with on return from winter warmup in Tropical Queensland...

Thursday, 19 June 2014

Homemade bogies

Just picked up new sides for my attempt at homemade bogies - in the manner of the fabricated one I bought first. Sketched up a Bettendorf style profile with 180mm axle centres drawn in DXF (autocad) for the local plasma cutter. Bearing holes at 25.5mm to be reamed to 26mm to suit type 6000 deep groove sealed ball bearings (26x10x8mm) and with a pivot to be drilled to 10mm and countersunk - in due course; and to weld on a few bits to make proper contour and appearance. Also procured a bunch of bearings for $1 each!
Next problem wheels and axles... in due course!

Livery...

Decided on livery for the S.R.R. - maroon (or heritage red) and gold, with grey roof (or cushion in this case). The sides are 25cm, seat width 25cm and 10cm high density foam, and length 1.5m. Footboards are 10cm wide with black anti slip tape. I recycled some black edging from the boat. The drawbar height is standard for 5" gauge at 8.25cm!

End view shows lift handles left over from making road cases, red Anderson plug - just in case... On the side just behind the end panel are the controls (so far) - speed control knob, direction switch (centre off) and battery master switch. Looking for a Curtis permanent magnet motor controller ( per mobility scooters) to play with...



Last is of undercarriage showing minimal ground clearance of the drive chain.
Standards say 1cm clear of track. I have about 4mm...

All good fun... when I make some more track - after the winter holiday!




Sunday, 15 June 2014

Driving Car

Well I have had some 1mm steel folded into sides for a riding car 1500mm long. Welded up a simple frame from mild steel flat and angle, and mounted the bogies - with two polycarbonate discs as bearing surfaces rather than rubbing blocks.

Then, having no prospect of a locomotive in the short term, I decided to motorise the riding car. Had a wheel on each axle press off, chain sprockets fitted on the axles, and wheels replaced. Procured a 250watt 24volt geared motor from Oatley, a $5 speed controller from China, found a couple of switches and cable lying around, and a battery...

Welded a bracket onto the cross bolster, fabricated an adjustable motor mount, installed the bogie and then the chain; voila motorised riding car!

With 12 volts happily carries Maz and me - say 180kg - on the flat. Great traction with me over the driven bogie!!!

Put two truck batteries inside giving 24volts 700CCA - WOW, smoking' Acceleration!!!

Better make the new wagon a bit presentable.

Wednesday, 11 June 2014

Test Track

I have made a bit of track! Using 20x10mm mild steel bar as rails and 32x5 x250mm flat at 150mm centres as sleepers/ties. Probably a bit wider than needed. I have welded up 4.5m of track in a trial 1.8m timber jig... The welds are on top of the ties. I think I will make a different, steel tube jig and weld on the bottom of the rails. i.e upside down. Have bought a secondhand horizontal bandsaw for all this cutting. Fitting a coolant system too!

Thinking about screwing on treated timber sleepers to 'float' in ballast better... Also thinking about using (expensive) 'Modwood'... Also thinking about machining slots into Modwood/timber and press fitting rails... The reality is that I can only use a few hundred metres of track on our 18x60m block!!!! Some of it will need to be flush with concrete drives and paths (most of which exists already...)

Think I will try to use minimum radius of 3.5m for curves and points/turnouts... oh and have procured a car remote locking servo with about a 25mm throw to try as a points motor (using over-center lock!) Saw some points with moving blade machine out on the inside to clear wheel flange. Nice and strong... Might use lighter bar for guide/guard rails, maybe 20x5...

Lots of thinking...

Sunday, 1 June 2014

Bogies... or 'trucks'

I bought a part of 5" gauge bogies through ebay... Mild Steel plate sides and a pivoting 'bolster', good wheels and 6001 sealed metric bearings (12x28x8mm). Should be a fine start...